How to Fix a Leaky Faucet: A Step-by-Step Guide

Leaky faucets are one of the most common plumbing problems that homeowners face. Not only are they annoying, but they can also waste a lot of water and increase your water bill. If you have a leaky faucet, don't panic. In this blog post, we will provide you with a step-by-step guide on how to fix it yourself.

Step 1: Turn off the Water Supply

Before you start fixing the faucet, you need to turn off the water supply. Look for the shut-off valve located under the sink and turn it clockwise until the water supply is completely shut off.

Step 2: Remove the Faucet Handle

Use a screwdriver to remove the screw that holds the faucet handle in place. Once the screw is removed, you can easily lift off the handle.

Step 3: Remove the Cartridge

Use pliers to remove the cartridge from the faucet. If the cartridge is stuck, you can use a cartridge puller to remove it.

Step 4: Inspect the Cartridge

Inspect the cartridge for any damage or wear and tear. If the cartridge is damaged, you will need to replace it. You can purchase a new cartridge from your local hardware store.

Step 5: Replace the Cartridge

Insert the new cartridge into the faucet and secure it in place with the pliers. Make sure that the cartridge is properly aligned with the faucet.

Step 6: Reassemble the Faucet

Reassemble the faucet by putting the handle back in place and securing it with the screw.

Step 7: Turn on the Water Supply

Turn on the water supply by turning the shut-off valve counterclockwise. Turn on the faucet and check for any leaks. If there are no leaks, you have successfully fixed the leaky faucet.

Red Lilly Plumbing

In conclusion, fixing a leaky faucet is a simple DIY project that you can do yourself. However, if you are not comfortable with plumbing work, you can always call a professional plumber like Red Lilly Plumbing to fix the problem for you. Remember, fixing a leaky faucet can save you money on your water bill and help conserve water.